The Duct Hunter is a series of locatable duct Rodders from Jameson. Every Duct Hunter rodder is made with a continuous fiberglass duct rodder with a copper wire embedded in the rod core. Users can connect a pipe & cable locator transmitter to the reel and transmit a locatable signal along the entire length of the rod; allowing users to locate previously non-locatable pipe or duct up to 10' deep, using a pipe & cable receiver. Duct Hunter locatable Rodders are perfect to use for locating underground PVC, PE, concrete, clay , or tile pipe.
Duct Hunter- 7/16" Diameter Rod - For Conduit 4" or Larger
Heavy duty non-conductive locatable rodder for manhole-to-manhole work or long-run cable pulls. The 7/16" diameter rod is the stiffest rod for the largest pipes and longest runs. All terrain wheels are available.
| Part Number | Diameter | Length (weight) |
| 13-716-300M | 7/16" | 300' |
| 13-716-400M | 7/16" | 400' |
| 13-716-500M | 7/16" | 500' |
| 13-716-600M | 7/16" | 600' |
| 13-716-800M | 7/16" | 800' |
| 13-716-1000M | 7/16" | 1,000' |
| Rod Diameter | 7/16" OD |
| Lengths | 300' to 1,000' |
| For Conduit Use | 4"+ |
| Size | 48" H x 44" L x 21" W |
| Weight | 80 lbs. (300') 90 lbs. (400') 100 lbs. (500') 115 lbs. (600') 145 lbs. (800') 164 lbs. (1,000') |
| Male End Ferrule Thread Size | 3/16"-16 |
| Bend Radius | 9" |
| Marked | Rod is marked every 5-foot |
| Usage | Manhole to manhole or long cable runs. |
